Example: Route Traffic To A Specific Wan Interface Based On The Client Mac Address - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

Example: Route traffic to a specific WAN interface based on the

client MAC address

This example routes all data from a certain client device through a cellular WAN based on the device's

MAC address, while all other client devices are routed through the Ethernet WAN.

1. Log into the TX54 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Create new firewall zones:

a. Create a firewall zone named CellularWAN with Source NAT enabled:

i. Click Firewall > Zones.

ii. For Add Zone, type CellularWAN and click .

TX54 User Guide