Table of Contents
Advertisement
Wi-Fi
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure the Wi-Fi module band and protocol
For Wi-Fi radios that support both 2.4 GHz and 5 GHz modes, you can configure the band. .
On TX54 models with only one Wi-Fi radio, the default protocol and band for the one radio is the
n
5 GHz ac.
On TX54 models with two Wi-Fi radios, Wi-Fi1 radio defaults to use 2.4 GHz b/g/n band, and
n
Wi-Fi2 radio defaults to use 5 GHz ac/n band.
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
TX54 User Guide
36
l
40
l
44
l
48
l
auto
l
Configure the Wi-Fi module band and protocol
162
Advertisement
Table of Contents
