Forward Location Information To A Remote Host - Digi TX54 User Manual

Services
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Forward location information to a remote host

You can configure location clients on the TX54 device that forward location messages in either
NMEA or TAIP format to a remote host.
Depending on how the TX54 device's location feature is enabled, you can forward the device's location
information based on its GNSS module, or location information from an external source, or both:
If the location server is enabled, location information from external sources is forwarded.
n
If the GNSS module is enabled, the device's location information based on its GNSS module is
n
forwarded.
Required configuration items
Enable either the location server, or the GNSS module, or both.
n
The hostname or IP address of the remote host to which the location messages will be
n
forwarded.
The destination UDP port on the remote host to which the messages will be forwarded.
n
Protocol type of the messages being forwarded, either NMEA or TAIP.
n
Additional configuration items
Additional remote hosts to which the location messages will be forwarded.
n
Location update interval, which determines how often the device will forward location
n
information to the remote hosts.
A description of the remote hosts.
n
Specific types of NMEA or TAIP messages that should be forwarded.
n
Text that will be prepended to the forwarded message.
n
A vehicle ID that is used in the TAIP ID message and can also be prepended to the forwarded
n
message.
Configure the TX54 device to forward location information:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX54 User Guide
Location information
443