Table of Contents
Advertisement
Firmware configuration
Review IX10 default settings
You can review the default settings for your IX10 device by using the local WebUI or Digi Remote
Manager:
Local WebUI
1. Log into the IX10 WebUI as a user with Admin access. See
details.
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. From the menu, click Devices to display a list of your devices.
3. Locate your device as described in
4. Click the Device ID.
5. Click Settings.
6. Click to expand Config.
The following tables list important factory default settings for the IX10.
Default interface configuration
Interface
type
Preconfigured interfaces
Wireless
n
Wide Area
Network
(WWAN)
Local Area
Network
(LAN)
IX10 User Guide
Use Digi Remote Manager to view and manage your
Modem
ETH
n
Review IX10 default settings
Using the local web interface
Devices
Default configuration
Modem
Firewall zone:
n
n
External
WAN priority:
n
Metric=3
SIM failover after 5
n
attempts
SureLink enabled for
n
IPv4
Ethernet:
Firewall zone:
n
n
ETH
Internal
IP Address:
n
192.168.2.1/24
DHCP server
n
enabled
LAN priority:
n
Metric=5
for
device.
40
Advertisement
Table of Contents
