Digi TX54 User Manual page 502

Applications
Upload a custom name
1. Log into the TX54 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.10 (default, Jan 31 2020, 08:45:19)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the name submodule:
>>> from digidevice import name
4. Upload the name to Remote Manager:
>>> name.upload("my_name")
Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
5.
Help for upload the device name to Digi Remote Manager
Get help for uploading the device name to Digi Remote Managerby accessing help for
digidevice.name:
1. Log into the TX54 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.10 (default, Jan 31 2020, 08:45:19)
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the name submodule:
>>> from digidevice import name
>>>
4. Use the help command with name:
>>> help(name)
Help on module digidevice.name in digidevice:
TX54 User Guide
Digidevice module
502