Table of Contents
Advertisement
Virtual Private Networks (VPN)
Show GRE tunnels
To view information about currently configured GRE tunnels:
WebUI
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, click Status > IP tunnels.
The IP Tunnelspage appears.
3. To view configuration details about a GRE tunnel, click the (configuration) icon in the upper
right of the tunnel's status pane.
Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Use the show vpn iptunnel command:
(config)> show vpn iptunnel
gre_tunnel
enable true
keepalive false
no key
local /network/interface/gre_endpoint
remote 172.168.1.2
type gre
(config)>
4. Type cancel to exit configuration mode:
(config)> cancel
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
TX54 User Guide
Generic Routing Encapsulation (GRE)
370
Advertisement
Table of Contents
