Configuration and management
Review IX10 default settings
You can review the default settings for your IX10 device by using the local WebUI or Digi Remote
Manager:
Local WebUI
1. Log into the IX10 WebUI as a user with Admin access. See
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. Click Device Management to display a list of your devices.
3. Locate and select your device as described in
your
device.
4. Click Configure.
The following tables list important factory default settings for the IX10.
Default interface configuration
Interface
type
Preconfigured interfaces
Wireless
Wide Area
Network
(WWAN)
Local Area
Network
(LAN)
IX10 User Guide
Modem
n
ETH
n
Loopback
n
Review IX10 default settings
Using the web interface
Use Digi Remote Manager to view and manage
Devices
Modem
n
Ethernet:
n
ETH
Ethernet:
n
Loopback
for details.
Default configuration
Firewall zone:
n
External
WAN priority:
n
Metric=3
SIM failover after 5
n
attempts
SureLink enabled
n
for IPv4
Firewall zone:
n
Internal
IP Address:
n
192.168.2.1/24
DHCP server
n
enabled
LAN priority:
n
Metric=5
Firewall zone:
n
Loopback
IP address:
n
127.0.0.1/8
32