Digi TX54 User Manual page 189

Wi-Fi
wifi2
(config network wifi client new_client)>
b. Set the appropriate radio:
(config network wifi client new_client)> radio wifi1
(config network wifi client new_client)>
5. Configure the Wi-Fi network that the client will use:
a. Set the SSID of the access point that the client will use to connect to the Wi-Fi network:
(config network wifi client new_client)> ssid 0 ssid value
where value is the SSID of the access point.
b. Set the security for the access point:
(config network wifi client new_client)> ssid 0 encryption type value
(config network wifi client new_client)>
where value is the type of encryption used by the access point. Allowed values are:
n
n
n
n
c. If the type of encryption is set to:
n
n
6. (Optional) Configure background scanning.
Background scanning allows the device to scan for nearby access points and to move between
access points that have the same SSID that is configured for the client connection, based on
the signal strength of the access points.
TX54 User Guide
none: no encryption.
psk: WPA personal encryption.
psk2: WPA2 personal encryption.
wpa2: WPA2 enterprise encryption.
psk or psk2, set the password that the client will use to connect to the access
point:
(config network wifi client new_client)> ssid 0 encryption key_
psk2 password
(config network wifi client new_client)>
wpa2:
i. Set the username that the client will use to connect to the access point:
(config network wifi client new_client)> ssid 0 encryption id_
wpa2 username
(config network wifi client new_client)>
ii. Set the password that the client will use to connect to the access point:
(config network wifi client new_client)> ssid 0 encryption
password_wpa2 pwd
(config network wifi client new_client)>
Configure a Wi-Fi client and add client networks
Wi-Fi2 radio
189