Table of Contents
Advertisement
Central management with Digi Remote Manager
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Monitoring > Device Health.
Device health data upload is enabled by default. To disable, click to toggle off Enable Device
Health samples upload.
4. For Health sample interval, select the interval between health sample uploads.
5. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
TX54 User Guide
Collect device health data and set the sample interval
682
Advertisement
Table of Contents
