Table of Contents
Advertisement
Firmware configuration
Review Connect IT 4 default settings
You can review the default settings for your Connect IT 4 device by using the local WebUI or Digi
Remote Manager:
Local WebUI
1. Log into the Connect IT 4 WebUI as a user with Admin access. See
for details.
2. On the menu, click System > Device Configuration.
Digi Remote Manager
1. If you have not already done so, connect to your Digi Remote Manager account.
2. From the menu, click Devices to display a list of your devices.
3. Locate your device as described in
4. Click the Device ID.
5. Click Settings.
6. Click to expand Config.
The following tables list important factory default settings for the Connect IT 4.
Default interface configuration
Interface type
Wide Area Networks (WAN)
Wireless Wide Area
Networks (WWAN)
Local Area Networks (LANs)
Digi Connect IT® 4 User Guide
Use Digi Remote Manager to view and manage your
Preconfigured
interfaces
Devices
WAN
n
n
Modem
n
n
LAN
Ethernet: LAN
n
n
Loopback
Ethernet:
n
n
Loopback
Review Connect IT 4 default settings
Using the local web interface
Default configuration
Ethernet:
Firewall zone: External
n
WAN priority: Metric=1
WAN
n
IP Address: DHCP
n
client
Digi SureLink
n
enabled for IPv4
Modem
Firewall zone: External
n
WAN priority: Metric=3
n
SIM failover after 5
n
attempts
Firewall zone: Internal
n
IP address:
n
192.168.2.1/24
DHCP server enabled
n
LAN priority: Metric=5
n
Firewall zone:
n
Loopback
IP address: 127.0.0.1/8
n
device.
TM
27
Advertisement
Table of Contents
