Change The Default Hotspot Ip Address And Subnet - Digi TX54 User Manual

Hotspot
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Change the default hotspot IP address and subnet

Required configuration items
Enable default hotspot configuration. See
n
instructions.
An IP address and subnet for the hotspot.
n
Additional configuration items
Hotspot DHCP server settings:
n
Lease time.
l
Lease range start and end.
l
To change the default hotspot IP address and subnet:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Hotspots > hotspot.
TX54 User Guide
Enable hotspot using the default configuration
Hotspot configuration
for
205