Digi TX54 User Manual page 323

Hide thumbs Also See for TX54:

Table of Contents

Virtual Private Networks (VPN)

3. Click Network > SCEP Client.

4. For Add clients, enter a name for the SCEP client and click .

The new SCEP client configuration is displayed.

5. Click Enable to enable the SCEP client.

6. For Renewable Time, type the number of days that the certificate enrollment can be renewed,

prior to the request expiring. This value is configured on the SCEP server, and is used by the

TX54 device to determine when to start attempting to auto-renew an existing certificate. The

default is 7.

7. (Optional) For CRL file name, type the filename of the Certificate Revocation List (CRL) from the

The CRL is stored on the TX54 device in the /etc/config/scep_client/client_name directory.

8. Click to expand SCEP server.

9. For FQDN, type the fully qualified domain name or IP address of the SCEP server.

TX54 User Guide