Table of Contents
Advertisement
User authentication
the sample tac_plus.conf file is system, which is also the default setting in the TX54
configuration.
10. (Optional) Click again to add additional TACACS+ servers.
11. Add TACACS+ to the authentication methods:
a. Click Authentication > Methods.
b. For Add method, click .
c. Select TACACS+ for the new method from the Method drop-down.
Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned.
12. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Add a TACACS+ server:
(config)> add auth tacacs+ server end
(config auth tacacs+ server 0)>
TX54 User Guide
Terminal Access Controller Access-Control System Plus (TACACS+)
542
Advertisement
Table of Contents
