Digi TX54 User Manual page 71

Interfaces
>
To view detailed status and statistics for a specific modem, use the
n
name
named wwan1:
> show modem name wwan1
wwan1: [Telit] LM940
---------------------------------------------------------------------
---------
IMEI
Manufacturer
Model
FW Version
Revision
Status
------
State
APN
Signal Strength
Bars
Access Mode
Temperature
IP address (IPv4)
Gateway (IPv4)
SIM
---
SIM Slot
SIM Status
IMSI
ICCID
SIM Provider
>
Unlock a SIM card
A SIM card can be locked if a user tries to set an invalid PIN for the SIM card too many times. In
addition, some cellular carriers require a SIM PIN to be added before the SIM card can be used. If the
SIM card is locked, the TX54 device cannot make a cellular connection.

Command line
To unlock a SIM card:
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
TX54 User Guide
command. For example, to view detailed status and statistics for a modem
: 781154796325698
: Telit
: LM940
: 24.01.541_ATT
: 24.01.541
: connected
: 1234
: Good (-85 dBm)
: 2/5
: 4G
: 34C
: 10.200.1.2
: 10.200.1.1
: 1
: ready
: 21685216482134
: 26587956542156312312
: AT&T
Wide Area Networks (WANs)
show modem name
71