Digi TX54 User Manual page 221

Hotspot
(config network interface hotspot_bridge_interface)> ipv4 address ip_
address/netmask
(config network interface hotspot_bridge_interface)>
g. Type ... to return to the config prompt:
(config network interface hotspot_bridge_interface)> ...
(config)>
5. Create a new hotspot:
(config)> add network hotspot new_hotspot
(config network hotspot new_hotspot)>
New hotspots are enabled by default.
To disable:
n
(config network hotspot new_hotspot)> enable false
(config network hotspot new_hotspot)>
To enable, it it has been disabled:
n
(config network hotspot new_hotspot)> enable true
(config network hotspot new_hotspot)>
6. Add devices to the bridge:
a. Determine available devices:
(config network bridge new_hotspot_bridge)> .. .. interface lan1 device
?
Device: The network device used by this network interface.
Format:
/network/device/eth1
/network/device/eth2
/network/device/eth3
/network/device/eth4
/network/device/loopback
/network/bridge/hotspot_bridge
/network/bridge/lan1
/network/wireless/ap/digi_ap1
/network/wireless/ap/digi_ap2
/network/wireless/ap/digi_hotspot_ap1
/network/wireless/ap/digi_hotspot_ap2
Default value: /network/bridge/lan1
Current value: /network/bridge/lan1
(config network bridge new_hotspot_bridge)>
TX54 User Guide
Hotspot configuration
221