Table of Contents
Advertisement
Configuration and management
or exit the user interface. The unique, factory-assigned default password is printed on the bottom
label of the device (or the printed label included in the package).
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users > admin.
4. Enter a new password for the admin user.
5. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
Command line
TX54 User Guide
Reset default password for the default admin user
32
Advertisement
Table of Contents
