Table of Contents
Advertisement
User authentication
3. Click Authentication > TACACS+ > Servers.
4. For Add server, click .
The TACACS+ server configuration window is displayed.
5. For Hostname, type the hostname or IP address of the TACACS+.
6. (Optional) Change the default Port setting to the appropriate port.
7. For Secret, type the TACACS+ server's shared secret. This is configured in the key parameter of
the TACACS+ server's tac_plus.conf file, for example:
key = testing123
8. (Optional) For Group attribute, type the name of the attribute used in the TACACS+ server's
configuration to identify the TX54 authentication group or groups that the user is a member of.
For example, in
file is groupname, which is also the default setting in the TX54 configuration.
9. (Optional) For Service, type the value of the service attribute in the the TACACS+ server's
configuration. For example, in
TX54 User Guide
Terminal Access Controller Access-Control System Plus (TACACS+)
TACACS+ user
configuration, the group attribute in the sample tac_plus.conf
TACACS+ user
configuration, the value of the service attribute in
541
Advertisement
Table of Contents
