Digi TX54 User Manual page 746

Command line interface
service
system
vpn
Run "config" with no arguments to enter the configuration editing mode.
> config
2. You can then display help for the additional configuration commands. For example, to display
help for the config service command:
> config service ?
Services
Additional Configuration
--------------------------------------------------------------------------
dns
mdns
multicast
ntp
remote_control
snmp
ssh
telnet
web_admin
> config service
3. Next, display help for the config service ssh command:
> config service ssh ?
SSH: An SSH server for managing the device.
Parameters
--------------------------------------------------------------------------
enable
key
port
Additional Configuration
--------------------------------------------------------------------------
acl
mdns
> config service ssh
4. Lastly, display the allowed values and other information for the enable parameter:
> config service ssh enable ?
Enable: Enable the service.
TX54 User Guide
Execute configuration commands at the root Admin CLI prompt
Services
System
VPN
DNS
Service Discovery (mDNS)
Multicast
NTP
Remote control
SNMP
SSH
Telnet
Web administration
Current Value
true Enable
[private] Private key
22 Port
Access control list
746