Digi TX54 User Manual page 609

Firewall
3. Click Firewall > Web filtering service.
4. Click Enable web filtering to enable.
5. For Web filtering service, select Manual.
6. Click to expand Servers.
7. Click  to add a server.
8. For IP address, enter the IP address of the DNS server.
9. (Optional) Repeat for additional DNS servers.
10. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
TX54 User Guide
Web filtering
609