Digi TX54 User Manual page 475

Applications
3. Highlight the scripts directory and click  to open the directory.
4. Click  (upload).
5. Browse to the location of the script on your local machine. Select the file and click Open to
upload the file.
The uploaded file is uploaded to the /etc/config/scripts directory.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, use the
device:
> scp host hostname-or-ip user username remote remote-path local local-path
to local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied to
n
the TX54 device.
local-path is the location on the TX54 device where the copied file will be placed.
n
For example:
To upload a Python application from a remote host with an IP address of 192.168.4.1 to the
/etc/config/scripts directory on the TX54 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/test.py local
/etc/config/scripts/ to local
admin@192.168.4.1's password: adminpwd
test.py
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Note You can also create Python applications by using the vi command when logged in with shell
access.
TX54 User Guide
Configure applications to run automatically
scp command to upload the Python application script to the TX54
100% 36MB 11.1MB/s 00:03
475