Digi TX54 User Manual page 319

Virtual Private Networks (VPN)
(config vpn ipsec tunnel ipsec_example)> connection_monitor timeout value
(config vpn ipsec tunnel ipsec_example)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set timeout to ten minutes, enter either 10m or 600s:
(config vpn ipsec tunnel ipsec_example)> connection_monitor interval 600s
(config vpn ipsec tunnel ipsec_example)>
The default is 15 seconds.
11. Configure test targets:
a. Add a test target:
(config vpn ipsec tunnel ipsec_example)> add connection_monitor target
end
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
b. Set the test type:
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
test value
(config vpn ipsec tunnel ipsec_example connection_monitor target 0)>
where value is one of:
n
n
TX54 User Guide
ping (IPv4) or ping6 (IPv6): Tests connectivity by sending an ICMP echo request to
a specified hostname or IP address.
Specify the hostname or IP address by using ping_host or ping_host6:
l
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> ping_host host
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
(Optional) Set the size, in bytes, of the ping packet by using ping_size or ping_
l
size6:
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> ping_size [num]
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
dns (IPv4) or dns6 (IPv6): Tests connectivity by sending a DNS query to the
specified DNS server.
Specify the DNS server. Allowed value is the IP address of the DNS server.
l
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)> dns_server ip_address
(config vpn ipsec tunnel ipsec_example connection_monitor
target 0)>
IPsec
319