Table of Contents
Advertisement
Interfaces
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Configuration > Network > Bridges > LAN1 > Devices.
4. Delete the ETH3, ETH4, and Digi AP (Wi-Fi2) (dual-Wi-Fi models only) devices from the bridge:
a. Click the menu icon (...) next to the ETH3 device and select Delete.
b. Repeat for the ETH4 and Digi AP (Wi-Fi2) devices.
5. Create a new bridge:
a. For Add Bridge, type LAN2 and click .
b. Add the ETH3 and Digi AP (Wi-Fi2) devices to the bridge:
i. Click to expand Devices.
ii. For Add Device:, click .
TX54 User Guide
Local Area Networks (LANs)
112
Advertisement
Table of Contents
