Digi TX54 User Manual page 612

Firewall
3. Disable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to disable.
c. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the
top of the page to locate it.
4. From a new tab in your browser, attempt to connect to the Cisco test
URL http://www.internetbadguys.com.
The connection should be successful.
5. Return to the TX54 WebUI and enable web filtering:
a. Click Firewall > Web filtering service.
b. Click Enable web filtering to enable.
c. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the
top of the page to locate it.
6. From your browser, attempt to connect
The connection attempt should fail with the message, "This site is blocked due to a phishing
threat."
TX54 User Guide
to http://www.internetbadguys.com
Web filtering
again.
612