User authentication
TX54 user authentication
User authentication on the TX54 has the following features and default configuration:
Feature
Idle timeout
Allow shell
Methods
Groups
Users
TACACS +
RADIUS
User authentication methods
Authentication methods determine how users of the TX54 device are authenticated. Available
authentication methods are:
TX54 User Guide
Description
Determines how long a user session can be idle before the
system automatically disconnects.
If disabled, prevents all authentication prohibits access to the
shell prompt for all authentication groups. This does not
prevent access to the Admin CLI.
Note
If shell access is disabled, re-enabling it will erase the
device's configuration and perform a factory reset.
Determines how users are authenticated for access: local
users , TACACS+ , or RADIUS .
Associates access permissions for a group. . You can modify the
released groups and create additional groups as needed for
your site. A user can be assigned to more than one group.
Local users for the TX54.
Terminal Access Controller Access-Control System Plus servers
and users.
Remote Authentication Dial-In User Service servers and users.
TX54 user authentication
Default
configuration
10 minutes.
n
Enabled.
n
local users.
n
admin:
n
Provides the
logged-in user
with
administrative
and shell
access.
serial:
n
Provides the
logged-in user
with access to
serial ports.
admin:
n
Belongs to
both the
admin and
serial groups.
Not
n
configured.
Not
n
configured.
507