Delete A Wan Or Wwan - Digi TX54 User Manual

Interfaces

Delete a WAN or WWAN.

Follow this procedure to delete any WANs and WWANs that have been added to the system. You
cannot delete the preconfigured WAN, WAN1, or the preconfigured WWANs, WWAN (single-cellular
models) or WWAN1 and WWAN2 (dual cellular models).

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Click the menu icon (...) next to the name of the WAN or WWAN to be deleted and select Delete.
5. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
TX54 User Guide
Wide Area Networks (WANs)
101