Digi TX54 User Manual page 798

Command line interface
interface
Specifies the interface through which traceroute should send packets. By default, the interface is
selected according to the routing table.
Optional: True
Ref: /network/interface
Type: string
ipchecksums
Calculate ip checksums.
Syntax: {True|False}
Type: boolean
max_ttl
Specifies the maximum number of hops (max time-to-live value) traceroute will probe.
Default: 30
Minimum: 1
Syntax: {Integer}
Type: integer
nomap
Do not try to map IP addresses to host names when displaying them.
Syntax: {True|False}
Type: boolean
nqueries
Sets the number of probe packets per hop. A value of -1 indicated
Default: 3
Minimum: 1
Syntax: {Integer}
Type: integer
packetlen
Total size of the probing packet. Default 60 bytes for IPv4 and 80 for Ipv6. A value of -1 specifies that
the default value will be used.
Default: -1
Minimum: -1
Syntax: {Integer}
Type: integer
pausemsecs
Minimal time interval between probes
Default: 0
Minimum: 0
Syntax: {Integer}
Type: integer
TX54 User Guide
Command line reference
798