Change The Default Hotspot Ssid - Digi TX54 User Manual

Hotspot

Change the default hotspot SSID

Required configuration items
Enable default hotspot configuration. See
n
instructions.
An SSID for the hotspot.
n

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Wi-Fi > Access points > Digi Hotspot AP (Wi-Fi) (single-Wi-Fi models) or Digi
Hotspot AP (Wi-Fi1) (dual-Wi-Fi models).
4. Change the default SSID, Digi Hotspot, to your preferred value.
5. (Dual Wi-Fi models only) Click Digi Hotspot AP (Wi-Fi2).
TX54 User Guide
Enable hotspot using the default configuration
Hotspot configuration
for
203