Digi TX54 User Manual page 452

Services
3. Click System > Time
4. (Optional) Select the Timezone for the location of your TX54 device.
5. (Optional) Add upstream NTP servers that the device will use to synchronize its time. The
default setting is time.devicecloud.com.
To change the default value of the NTP server:
n
a. Click NTP servers.
b. For Server, type a new server name.
To add an NTP server:
n
a. Click NTP servers.
b. For Add Server, click .
c. For Server, enter the hostname of the upstream NTP server that the device will use
d. Click  to add additional NTP servers. If multiple servers are included, servers are
Note This list is synchronized with the list of servers included with NTP server configuration,
and changes made to one will be reflected in the other. See
server for more information about NTP server configuration.
6. Click Apply to save the configuration and apply the change.
The Apply button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
TX54 User Guide
to synchronize its time.
tried in the order listed until one succeeds.
Configure the system time
Configure the device as an NTP
452