Digi TX54 User Manual page 448

Services
To add a message type:
a. Change to the filter_nmea node:
b. Use the add command to add the message type. For example, to add the gsa
If the protocol type is TAIP:
n
Allowed values are:
l
l
l
l
l
To remove a message type:
a. Use the show command to determine the index number of the message type to be
b. Use the index number to delete the message type. For example, to delete the id
To add a message type:
a. Change to the filter_taip node:
b. Use the add command to add the message type. For example, to add the id
TX54 User Guide
(config service location forward 0)> del filter_nmea 2
(config service location forward 0)>
(config service location forward 0)> filter_nmea
(config service location forward 0 filter_nmea)>
message type:
(config service location forward 0 filter_nmea)> add gsa end
(config service location forward 0 filter_nmea)>
al: Reports altitude and vertical velocity.
cp: Compact position: reports time, latitude, and longitude.
id: Reports the vehicle ID.
ln: Long navigation: reports the latitude, longitude, and altitude, the horizontal and
vertical speed, and heading.
pv: Position/velocity: reports the latitude, longitude, and heading.
deleted:
(config service location forward 0)> show filter_taip
0 al
1 cp
2 id
3 ln
4 pv
(config service location forward 0)>
(index number 2) message type:
(config service location forward 0)> del filter_taip 2
(config service location forward 0)>
(config service location forward 0)> filter_taip
(config service location forward 0 filter_taip)>
message type:
Location information
448