Show Openvpn Server Status And Statistics - Digi TX54 User Manual

Virtual Private Networks (VPN)
12. Save the configuration and apply the change:
(config openvpn client openvpn_client1 connection_monitor target 0)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show OpenVPN server status and statistics

You can view status and statistics for OpenVPN servers from either the web interface or the
command line:

WebUI
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, select Status > OpenVPN > Servers.
The OpenVPN Servers page appears.
3. To view configuration details about an OpenVPN server, click the  (configuration) icon in the
upper right of the OpenVPN server's status pane.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN servers, type the following at the prompt:
> show openvpn server all
Server
---------------
OpenVPN_server1
OpenVPN_server2
>
3. To display details about a specific server:
> show openvpn server name OpenVPN_server1
Server
Enable
Type
Zone
Address
Port
Use File
TX54 User Guide
Enable Type Zone
------ ---- --------
true tun internal
false tun internal
: OpenVPN_server1
: true
: tun
: internal
: 192.168.30.1/24
: 1194
: true
Address Port
--------------- ----
192.168.30.1/24 1194
192.168.40.1/24 1194
OpenVPN
362