Delete A Packet Filtering Rule - Digi TX54 User Manual

Firewall
(config)> firewall filter 1 enable true
5. To disable a packet filtering rule, use the index number with the enable false command. For
example:
(config)> firewall filter 1 enable false
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Delete a packet filtering rule

To delete a packet filtering rule:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Packet filtering.
TX54 User Guide
Packet filtering
584