Review Lr54 Default Settings; Local Webui; Digi Remote Manager; Default Interface Configuration - Digi LR54 User Manual

Firmware configuration

Review LR54 default settings

You can review the default settings for your LR54 device by using the local WebUI or Digi Remote
Manager:

Local WebUI

1. Log into the LR54 WebUI as a user with Admin access. See
details.
2. On the menu, click System > Device Configuration.

Digi Remote Manager

1. If you have not already done so, connect to your Digi Remote Manager account.
2. From the menu, click Devices to display a list of your devices.
3. Locate your device as described in
4. Click the Device ID.
5. Click Settings.
6. Click to expand Config.
The following tables list important factory default settings for the LR54.

Default interface configuration

Interface type
Wide Area
Network (WAN)
Wireless Wide-
Area Networks
(WWANs)
LR54 User Guide
Use Digi Remote Manager to view and manage your
Preconfigured interfaces
WAN1
n
WWAN
n
Review LR54 default settings
Using the local web interface
Devices Default configuration
Ethernet: Firewall zone:
n n
ETH1 External
WAN priority:
n
Metric=1
IP Address: DHCP
n
client
Digi SureLink
n
enabled for IPv4
WWAN Firewall zone:
n n
cellular External
WAN priority:
modem n
Metric=3
SIM failover after 5
n
attempts
SureLink enabled for
n
IPv4
for
device.
TM
35