Digi TX54 User Manual page 228

Hotspot
By default, the router redirects unauthenticated users to the HTML authentication page located on
the router at etc/config/hotspot/password.html. You can customize the authentication page as
needed, or host an authentication page on a remote server. See
further information.
Required configuration items
Create a new hotspot
n
Select RADIUS shared password authentication.
n
IP address or hostname of the primary RADIUS server.
n
A user on the RADIUS server with the username guest.
n
RADIUS server secret.
n
RADIUS NAS ID.
n
Domain name or subnet of the RADIUS server included in the "white list" of servers that
n
unauthenticated hotspot clients can access.
Additional configuration items
IP address or hostname of the secondary RADIUS server to be used if the primary
n
RADIUS server is unreachable.
Modify the local HTML authentication page, /etc/config/hotspot/password.html, or enter the
n
name of an alternative HTML authentication page stored in the same directory, or identify a
remote web server to host the HTML authentication page and include that server in the "white
list" of servers that unauthenticated hotspot clients can access. See
login page
Hotspot LAN configuration:

Configure hotspot for RADIUS shared password authentication from the WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX54 User Guide
or Enable hotspot using the default
for further information.
Hotspot configuration
Customize the hotspot login page
configuration.
Customize the hotspot
for
228