Digi TX54 User Manual page 117

Interfaces
6. Enable the access points and set the SSIDs:
a. Configure Digi AP (Wi-Fi) (single-Wi-Fi models) or Digi AP (Wi-Fi1) (dual-Wi-Fi models):
i. Click Network > Wi-Fi > Access points > Digi AP (Wi-Fi) (single-Wi-Fi models) or Digi
AP (Wi-Fi1) (dual-Wi-Fi models).
ii. Click Enable.
iii. For SSID, type Example1.
iv. For Pre-shared key, enter a password that clients will use to connect to this access
point.
b. Configure Digi AP (Wi-Fi2) (dual-Wi-Fi models only):
i. Click Network > Wi-Fi > Access points > Digi AP (Wi-Fi2).
ii. Click Enable.
iii. For SSID, type Example2.
iv. For Pre-shared key, enter a password that clients will use to connect to this access
point.
TX54 User Guide
Local Area Networks (LANs)
117