Interfaces
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Configuration > Network > Interfaces.
4. Create the WAN or select an existing WAN:
To create a new WAN, for Add interface, type a name for the WAN and click .
n
To edit an existing WAN, click to expand the WAN.
n
The Interface configuration window is displayed.
New WANs are enabled by default. To disable, click Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select External.
7. For Device, select an Ethernet device, a Wi-Fi client, or a bridge. See
information about bridging.
8. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
TX54 User Guide
Wide Area Networks (WANs)
Bridging
for more
83