Configure The Wi-Fi Module Channel - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

Configure the Wi-Fi module channel

By default, each Wi-Fi radio is configured to automatically select the best channel to use with respect

to other Wi-Fi networks. You can configure a specific channel to use for a Wi-Fi Wi-Fi radio by using the

following steps.

For the 2.4 GHz band, only channels 1 to 11 are supported; channels 12, 13, and 14 are not

supported. For the 5.0 GHz band, only non-Dynamic Frequency Selection (DFS) channels are supported.

1. Log into the TX54 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Network > WiFi.

4. Click to expand the appropriate Wi-Fi radio. For single-Wi-Fi models, there is only one radio

5. For Channel, select the channel. Only channels appropriate for the band are displayed.

6. Click Apply to save the configuration and apply the change.

TX54 User Guide

Configure the Wi-Fi module channel