Digi TX54 User Manual page 172

Wi-Fi
3. Click Configuration > Network > WiFi > Access points.
4. Create a new access point or modify an existing access point:
To create a new access point, for Add WiFi access point:, type a name for the access
n
point and click .
To modify an existing access point, click to expand the access point.
n
The Wi-Fi access point configuration window is displayed.
5. Enable the access point.
New access points are enabled by default. The default preconfigured access points are
disabled by default.
6. For Radio, select the appropriate Wi-Fi radio.
7. For SSID, type the SSID. Up to 32 characters are allowed.
8. Enable SSID broadcast to configure the radio to broadcast the SSID.
9. For Encryption, select WPA Personal (PSK) or WPA2 Personal (PSK).
10. For Pre-shared key, enter the password that clients will use when connecting to the access
point.
11. (Optional) For Group rekey interval, type the amount of time to wait before changing the
group key.
TX54 User Guide
Configure a Wi-Fi access point with personal security
172