Create A New Hotspot - Digi TX54 User Manual

Hotspot
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Create a new hotspot

Required configuration items
A device or bridge for the hotstpot.
n
If a bridge is used, it must be included in an interface with an assigned IP address.
l
The authentication mode:
n
If Local shared password is selected for the authentication mode, include the password.
l
If RADIUS shared password or RADIUS users is selected for the authentication mode,
l
include RADIUS configuration information.
If HotspotSystem is selected for the authentication mode, include HotspotSystem
l
configuration information.
See Hotspot authentication modes
The login page source, either Local or Remote.
n
If Remote is selected, include the IP address of fully-qualified domain name of the remote
l
web server that serves the login page.
An IP address and subnet for the hotspot.
n
Additional configuration items
If the login page source is Local, include the name of the local HTML file, if different than the
n
default.
If the login page source is Remote, include the shared secret that the remote server and the
n
hotspot. Used with cloud-based hotspot providers.
The Authentication port used by the hotspot.
n
The Server port used by the hotspot.
n
Hotspot DHCP server settings:
n
Lease time.
l
Lease range start and end.
l
Walled garden configuration:
n
Domains that clients connected to the hotspot can access prior to the client being
l
authenticated.
Subnets that clients connected to the hotspot can access prior to the client being
l
authenticated.
Maximum download speed, in Kbps.
n
Maximum upload speed, in Kbps.
n
Enable verbose logging.
n
To create a new hotspot:

WebUI
TX54 User Guide
for more information about authentication modes.
Hotspot configuration
213