Table of Contents
Advertisement
Wi-Fi
3. Show available access points:
(config)> network wifi ap ?
Additional Configuration
--------------------------------------------------------------------------
-----
digi_ap1
digi_ap2
(config)>
4. Set the SSID for the appropriate access point:
(config)> network wifi ap digi_ap1 ssid my_SSID
(config)>
5. SSID broadcasting is enabled by default for the preconfigured access points. If SSID
broadcasting is disabled:
(config)> network wifi ap digi_ap1 ssid_broadcast true
(config)>
6. Set the security for the access point to wpa2:
(config)> network wifi ap digi_ap1 encryption type wpa2
(config)>
7. Set the IP address or hostname of the RADIUS server:
(config)> network wifi ap digi_ap1 encryption host_wpa2 hostname
(config)>
8. Set the secret key as configured on the RADIUS server:
(config)> network wifi ap digi_ap1 encryption key_wpa2 secret_key
(config)>
9. (Optional) Set the RADIUS server's port. The default is 1812.
(config)> network wifi ap digi_ap1 encryption port_wpa2 port
(config)>
10. (Optional) Change the Wi-Fi radio for the access point (dual-Wi-Fi models only):
a. Show available radios:
(config)> network wifi radio ?
Additional Configuration
-----------------------------------------------------------------------
--------
wifi1
wifi2
TX54 User Guide
Configure a Wi-Fi access point with enterprise security
Digi AP (Wi-Fi1)
Digi AP (Wi-Fi2)
Wi-Fi1 radio
Wi-Fi2 radio
182
Advertisement
Table of Contents
