Bridging - Digi TX54 User Manual

Interfaces

Bridging

Bridging is a mechanism to create a single network consisting of multiple devices, such as Ethernet
devices and wireless access points.
By default, the TX54 has the following preconfigured bridges:
Interface type
Bridges
You can modify configuration settings for the existing bridge, and you can create new bridges.
This section contains the following topics:
Edit the preconfigured LAN1 bridge
Configure a bridge
TX54 User Guide
Preconfigured
interfaces Devices
Bridge: LAN1 Ethernet: ETH2
n n
Ethernet: ETH3
n
Ethernet: ETH4
n
Single-Wi-Fi models:
n
Wi-Fi access point:
Digi AP (Wi-Fi)
Dual-Wi-Fi models: Wi-
n
Fi access point: Digi
AP (Wi-Fi)
Dual-Wi-Fi models: Wi-
n
Fi access point: Digi
AP (Wi-Fi2)
hotspot_ Single-Wi-Fi models:
n n
bridge Wi-Fi access point:
Digi Hotspot AP (Wi-
Fi)
Dual-Wi-Fi models: Wi-
n
Fi access point: Digi
Hotspot AP (Wi-Fi1)
Dual-Wi-Fi models: Wi-
n
Fi access point: Digi
Hotspot AP (Wi-Fi2)
Bridging
Default
configuration
Enabled
n
Used by the
n
LAN1 interface
Disabled
n
Used by the
n
hotspot
interface
144
147
143