Command line interface
analyzer
Analyzer commands.
analyzer clear name STRING
Clears the traffic captured by the analyzer.
Parameters
name
Name of the capture filter to use.
Ref: /network/analyzer
Type: string
analyzer save filename STRING name STRING
Saves the current captured traffic to a file.
Parameters
filename
The filename to save captured traffic to. The file will be saved to the device's /etc/config/analyzer
directory.
Type: string
name
Name of the capture filter to use.
Ref: /network/analyzer
Type: string
analyzer start name STRING
Start a capture session of packets on this devices interfaces.
Parameters
name
Name of the capture filter to use.
Ref: /network/analyzer
Type: string
analyzer stop name STRING
Stops the traffic capture session.
Parameters
name
Name of the capture filter to use.
Ref: /network/analyzer
TX54 User Guide
Command line reference
770