Digi TX54 User Manual page 199

Hotspot
Change the default hotspot
n
Change the default authentication method:
n
Configure the hotspot to use local shared password
l
Configure the hotspot to use RADIUS shared password
l
Configure the hotspot to use RADIUS users
l
Configure the hotspot to use HotspotSystem
l
Change the default hotspot IP address and
n
Modify the sample local HTML page that the TX54 device uses by default for click-through
n
authentication. See

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Enable the hotspot:
a. Click Network > Hotspots > hotspot.
b. Click Enable hotspot.
TX54 User Guide
SSID.
subnet.
Edit sample hotspot HTML pages
authentication.
authentication.
authentication.
authentication.
for information.
Hotspot configuration
199