Table of Contents
Advertisement
User authentication
The login limit period.
l
One-time use eight-digit emergency scratch codes.
l
To configure a local user:
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User, type a name for the user and click .
The user configuration window is displayed.
The user is enabled by default. To disable, click to toggle off Enable.
5. Enter a password for the user.
TX54 User Guide
Local users
530
Advertisement
Table of Contents
