Step 3: Connect; Step 4: Power Up; Step 5: Configure - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

Digi TX54 Quick start

Step 3: Connect

a. If you intend to configure cellular WWAN access at this time,

b. Attach antenna(s).

c. If you intend to configure Ethernet WAN access at this time, use an Ethernet cable to connect

the TX54 WAN/ETH1 port to a hub with access to the Internet.

d. Use an Ethernet cable to connect the TX54 ETH2 port to your PC.

a. Connect DC power.

If you need help understanding power requirements, see

b. Indicator LEDs blink to show status during startup.

c. Wait for the power LED to stop blinking. The device is ready.

a. On the PC connected to the TX54, open a browser and go to 192.168.2.1.

b. Log into the TX54:

User name: Use the default user name: admin.

Password: Use the unique password printed on the bottom label of the device (or the printed

label included in the package).

TX54 User Guide

Step 3: Connect