Table of Contents
Advertisement
Virtual Private Networks (VPN)
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. (Optional) Change the NAT keep alive time.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}.
For example, to set NAT keep alive time to ten minutes, enter 10m or 600s.
The default is 40 seconds.
5. Click to expand Tunnels.
6. For Add IPsec tunnel, type a name for the tunnel and click .
The new IPsec tunnel configuration is displayed.
TX54 User Guide
IPsec
293
Advertisement
Table of Contents
