Table of Contents
Advertisement
Virtual Private Networks (VPN)
Zone
Mode
Type
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure a Simple Certificate Enrollment Protocol client
Simple Certificate Enrollment Protocol (SCEP) is a mechanism that allows for large-scale X.509
certificate deployment. You can configure TX54 device to function as a SCEP client that will connect to
a SCEP server that is used to sign Certificate Signing Requests (CSRs), provide Certificate Revocation
Lists (CRLs), and distribute valid certificates from a Certificate Authority (CA).
Required configuration
Enable the SCEP client.
n
The fully-qualified domain name of the SCEP server to be used for certificate requests.
n
The challenge password provided by the SCEP server that the SCEP client will use when
n
making SCEP requests.
The distinguished name to be used for the CSR.
n
The file name of the Certificate Revocation List (CRL) from the Certificate Authority (CA).
n
Additional configuration
The number of days that the certificate enrollment can be renewed, prior to the request
n
expiring.
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX54 User Guide
: ipsec
: tunnel
: esp
IPsec
322
Advertisement
Table of Contents
