Update Cellular Module Firmware - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

System administration

> update firmware file TX54-Dual-Cellular-19.11.72.58.bin

netflash: got "/etc/config/TX54-Dual-Cellular-19.11.72.58.bin",

length=37511229

netflash: authentication successful

netflash: programming FLASH device /dev/flash/image

Firmware update completed, reboot device

6. Reboot the device to run the new firmware image using the

Rebooting system

7. Once the device has rebooted, log into the TX54's command line as a user with Admin access

and verify the running firmware version by entering the

> show system

Current Time

Update cellular module firmware

You can update modem firmware by downloading firmware from the Digi firmware repository, or by

uploading firmware from your local storage onto the device.

This operation is available from the WebUI only. There is no equivalent functionality at the CLI.

1. (Optional) Download the appropriate modem firmware from the Digi repository to your local

2. Log into the TX54 WebUI as a user with Admin access.

3. From the main menu, click Status > Modems.

TX54 User Guide

: TX54-Dual-Cellular

: 19.11.72.58

: 0040FF800120

: Fri, 06 Dec 2019 09:25:36 +0000

: 42 seconds (42s)

Update cellular module firmware