Local Area Networks (Lans) - Digi TX54 User Manual

Interfaces

Local Area Networks (LANs)

The TX54 device is preconfigured with the following Local Area Networks (LANs):
Interface type
Local Area Networks (LANs)
You can modify configuration settings for LAN1, and you can create new LANs.
This section contains the following topics:
About Local Area Networks (LANs)
Configure a LAN
Example: Configure two LANs
Show LAN status and statistics
Delete a LAN
DHCP servers
Create a Virtual LAN (VLAN) route
TX54 User Guide
Preconfigured
interfaces Devices
LAN1 Bridge: LAN1
n n
LAN hotspot Bridge:
n n
hotspot_
bridge
Loopback Ethernet:
n n
Loopback
Default IP Bridge: LAN1
n n
Default Link- Bridge: LAN1
n n
local IP
Local Area Networks (LANs)
Default configuration
Firewall zone: Internal
n
IP address:
n
192.168.2.1/24
DHCP server enabled
n
LAN priority: Metric=5
n
DHCP server: disabled
n
Firewall zone: Loopback
n
IP address: 127.0.0.1/8
n
Firewall zone: Setup
n
IP address
n
192.168.210.1/24
Firewall zone: Setup
n
IP address
n
169.254.100.100/16
103
104
104
111
120
122
123
139