5 Repair
5.4.4 Replacing the wrist housing
5.4.4 Replacing the wrist housing
Location of the wrist
The wrist is located as shown in the figure.
xx2100000053
Summary of the replacement procedure
This is a brief summary of the replacement procedure, containing the major actions
to be performed.
Continues on next page
312
1 Remove the tubular cover.
2 Separate the cabling between the tubular and the tilt (at the axis-4 joint unit).
3 Remove the tilt and place on a workbench.
4 Remove the axis-6 joint unit.
© Copyright 2021 ABB. All rights reserved.
Product manual - CRB 15000
3HAC077389-001 Revision: A