ABB CRB 15000 Product Manual page 385

2
Securing the base
1
Product manual - CRB 15000
3HAC077389-001 Revision: A
Action
Refit the bottom cover with the attachment screws.
Note
Fit the cover in correct direction, the protrusion
of the cover must face outwards.
Action
Lift the base to standing and secure it to the
foundation with the attachment screws and
washers.
© Copyright 2021 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the base
Continued
Note
Hex socket head cap screw: M3x8
12.9 Gleitmo 603+Geomet 500 (8
pcs)
Tightening torque: 1.2 Nm.
xx2000002007
xx2100000268
Note
Attachment screws: M10x35 8.8 (4
pcs).
Washers: 23/10.5/2.5 mm Steel (4
pcs).
Tightening torque: 30 Nm ±10%.
xx2000002006
Continues on next page
385